Device Introduction:

TFP Intelligent Tower Filter Press is a fully automatic, efficient and energy-saving high-techSolid Liquid Separation Equipment。 The equipment uses the pressure of the pump, the gravity of the material and the action of air pressure or water pressure to form the pressure difference on both sides of the filter cloth, so as to achieve high efficiency solid-liquid separation. Widely used in smelting chemical industry oxides, electrolytic slag, leaching slag, slag dewatering and environmental protection sewage sludge waste acid treatment and other industries.

Filter Plate tower structure, filter cloth serpentine surround horizontal filtration, multi-cylinder synchronous up and down operation, hydraulic cylinder self-guided, compact structure, novel design: filtration, extrusion, washing, drying, unloading, filter cloth regeneration of the entire operation process can be completed continuously and automatically. Filtration pressure up to 20MPa, a variety of sticky materials and the requirements of low moisture content of the filter cake effect is significant, equipment operation using full hydraulic control, smooth operation, reliable, high safety factor. The use of PLC+ touch screen + automatic valve control, simple operation, high degree of automation.Vertical Filter PressFilter cake water is low, production capacity is large, work efficiency is several or even more than 10 times times the traditional hydraulic press.

How it works:

When the filter plate frame is closed, the slurry enters each filter cavity through the slurry tube at the same time. The filter passes through the filter cloth into the filter cavity, then enters the filter hose, and finally reaches the filter head to drain.

A extrusion of high-pressure water through a high-pressure water hose into the diaphragm, the diaphragm to the surface of the filter cloth extrusion filter cake, so that the filter extrusion filters.

Washing (optional stage): The detergent is pumped to the filter cavity using the same pipe as the same slurry: as the liquid is filled with the filter cavity, the diaphragm is lifted and the high pressure water above the diaphragm is squeezed out. The detergent flows into the discharge tube after passing through the filter cake and the filter cloth.

Two extrusion (optional stage) The detergent left in the filter cavity after the washing phase is squeezed out by the method in the second stage described above.

Air Drying: The final drying of the filter cake is done by compressed air. The air entering through the distribution tube is filled with a filter cavity, and the diaphragm is lifted so that the high pressure air on the diaphragm is discharged from the filter press. Through the reduction of the airflow of the filter cake, the moisture content of the filter cake to the best extent, while emptying the filter cavity.

Filter cake discharge: When the drying process is complete, the plate frame assembly opens, the filter cloth drive mechanism begins to run, the filter cake on the filter cloth from both sides of the filter press discharge.

Product Features:

1, the use of PLC+ touch screen + automatic valve control, simple operation, high degree of automation, one-click operation, can be achieved unattended.

2, short cycle cycle, large production capacity, filter cake moisture is low. Work efficiency is several or even more than 10 times times that of conventional hydraulic machines.

3, filtration pressure up to 20MPa, on a variety of sticky materials and the requirements of low moisture content of the filter cake effect is significant.

Field Application Showcase: